Understanding of blend air and blend air deluxe II manual will always be handy while repair and replacing will be required. The manual provided by Coleman is a detailed and complete guide on air circulation, machinery parts, and instrumentation parts of the furnaces.
How the Blend Air System Works?
The Blend Air systems are designed for two main purposes:
- Ventilate the attic
- Circulate fresh/ warm air
Since modern homes can be tightly positioned and built without much natural circulation the Blend Air systems can remove moisture from attics, prevent dampening and circulate hot air when put together with the furnace. The air circulation calibrated with the thermostat works for four hours on and off-cycle automatically.
Troubleshooting of the System:
In the troubleshooting of the Deluxe Blend Air II model, the most common problem you may face is ventilation. But it’s nota severe problem that you have to worry about. If the alarm of the ventilation system is just going on, you can just turn off the alarm switch. The control box of the systems is generally on the furnace compartment.
On Deluxe Blend Air & Blend Air Delux II manual, the process and instrumentation of the air circulation are described with utmost detail and in an easy language in the Blend Air & Blend Air Delux II Module. In short, the work of alarm signal, motor failure sensor, and fresh air on/off switch is described.
- The alarm switch indicates the ventilation on or off status.
- The Indicator lights indicate the status of the motor as follows: the green light for the attic fan motor and the amber light specifies if the motor is damp.
- There will be another switch with the previous two that will designate if the fresh air circulation is on or off.
If the information provided here is not enough to figure out the problem with your Blend Air system head over to our purchase section for the Blend Air & Blend Air Deluxe II model.
Colemanhvac Parts 